D-Link DAP-1820 Setup

The D-Link DAP-1820 can extend the wireless network’s coverage so long as it’s accessible in the uplink network. So, before proceeding further let’s discuss the D-Link DAP-1820 AC2000 Wifi Range Extender Setup process and have a quick overview of this.

Maximising wireless range

The way to maximize wireless range is to follow some simple rules given below.

Just place the D-Link extender and other devices at a minimum distance.
You should be aware of the direct line between the network device. After that, place the devices such that the signal travels uninterrupted.
The building materials make difference too. Be sure to set the extenders, access points as well as wireless routers such that the signal can pass through the drywall or doorways that are open.
Just keep the product away from electrical devices that generate RF noise.

D-Link DAP-1820 AC2000 Wifi Range Extender Setup process

There is a number of configuration tools used for the DAP-1820 setup process.

WPS PBC

D-Link wifi app

Web-based wireless setup wizard

Access point mode settings

Using WPS-PBC Configuration

Before you begin, ensure that you connect the DAP-1820 into the power outlet. It is recommended that the power light be flashing orange prior to proceeding with the configuration. The wireless Protected Setup (WPS) makes connecting your extender easy. To use WPS, the source router or the access point should possess the WPS button.

Start WPS mode

While the WPS light is blinking orange, press the WPS button on the router and then press the button present on the extender. Status LED is now set to flash green. Wait for 2 minutes until the process finishes. It will be solid green after the extender has connected successfully with the router’s wireless network.

Connect devices to the extender

The extender is ready to share the extended wifi network with your PC and the mobile device. You can utilize the WPS method to connect your devices to the network established by the extender by using its SSID. The password is identical to the wireless network you’re extending. A status light will become solid green once the DAP-1820 is properly connected to the WiFi network and expanding that network.

D-Link DAP-1820 Setup Using the D-link wifi app

The app allows you to connect and configure the extender on a device that is compatible with Android as well as iOS gadgets. Follow the steps to install your extender using the D-link app.

Firstly, install the free D-Link wifi app on your smartphone.
After that, open the app now.
Click the “install new devices” button located right in the centre of the screen.
Click yes, if you have the QR code for setup. If not, move to the next step.
Then, shift the product direction to AP and then select DAP-1820 from a list of available devices. Click on next to continue.
You will be guided to the step by step process for setting up your range extender. Simply follow the screen instructions to complete the installation process.

Using Wireless setup Wizard

The setup wizard for the D-Link DAP-1820 is designed to guide you through the steps of configuration for your new range extender. Follow the given instructions for setup via setup wizard.

Firstly, connect the extender wirelessly using the SSID and password located on the back of your extender.
Open any preferred web browser and enter the default gateway http://dlinkap.local in your browser’s URL field. Make use of the default IP address 192.168.0.50.
If you’re entering your credentials for the first time to the extender, and there is no connection established, the wizard for setting up will show automatically. If the procedure has not been completed previously, you must log in to the web interface and leave the password field unfilled.
Click “I agree” to the terms of service and privacy policy before moving forward. The wizard below will walk you through setting up your new extender wirelessly.
Then, click on next to begin.
Now please wait while your extender scan for available wifi networks.
The extender will scan for the available network and display the results. Choose one of the below options to proceed.
In the event that the network you’d like to scan was discovered during scanning, select the wireless network. Then, you’ll be automatically directed to the next stage.
Enter the password for your router right now.
In case the wifi network you wish to extend is not being detected through the scanner, press the “Manual button”. You must enter your SSID and password for the current wifi network that you want to increase the coverage of.
After that, click next to continue, or move back to the first step.

Securing the extender's web-based configuration utility.

Enter an administrator password. It will prompt you to enter the password every time you attempt to make use of the web configuration tool of the extender.
Then, click on next to continue.
Select the time zone from the drop-down menu now.
Click on next to continue again.
Make a choice whether to keep your device updated automatically or control the device updates by yourself as the up to date firmware provides you with the latest features and protections.
Click on next.
At the end of the wizard, you will be presented with the final summary of your settings. It is recommended to note this information for any future reference.
The changes made will be saved and the extender shall reboot now.
Click on OK to exit from the D-Link Extender setup wizard and hence you will be taken to the login page back.
You can relocate the extender where you require internet access.

D-Link DAP-1820 AC2000 Wifi Range Extender Setup Using ethernet cable

You can always configure the settings of the extender through the access point mode also. Follow the given steps for the same.

Connect an ethernet cable from the router’s LAN port to the LAN port at the bottom of your extender.
To open the access point mode settings page, simply click the settings drop-down menu at the top of the page and then select extender.
Then, click on the Save button finally to apply the settings you made and return to the home page.
Under the existing network option, choose ethernet to utilize the extender as an access point.

Basic troubleshooting tips

Your computer and the web interface must be on the same IP.
The browser should be updated properly.
Ensure that you are connected to the same wireless network which is present on the extender base.
Disable any internet security software on the computer as it may block access to the configuration page.

Conclusion

The D-Link DAP-1820 Setup process can be performed via various methods as discussed above. If you still have any doubts or issues related to the setup process, get in touch with our help team now.